Posted: Mon Jun 29, 2009 3:13 pmFirst let me expain myself. I am new to this forum but have already found it helpful. I have a small carburetor company. www.pbcproducts.com is my website. Being small and starting out every dollar is critical. my building is very small and space is at a premeum. I am want a flow bench to test my performance carbs. As with most I cant afford a commercial bench. I do not really need to flow every hole in the carb, i could do one at a time. this means i could get by with approx 300 cfm at 28". let me know what you guys think. I am not scared of using manometers until i can afford the computer stuff.