Page 1 of 1
Posted:
Thu Apr 02, 2009 5:46 amby Quan-Time
have you concidered buying some plans, and spending a solid weekend building your own ?
The other thing i can suggest is contact Bruce (owner of these here parts) and see if you cant strike a deal with him.. Best i can offer..
goodluck.
Posted:
Thu Apr 02, 2009 2:07 pmby jfholm
Dennis,
I agree that you may be better served to buy the plans and if nothing else take them to a cabinet shop and have it built. Once you have the plans you will see that it is much easier to install the motors and wiring, at least the first time, during construction when the bench is at a partial assembled stage. You may be able to have a custom panel installed in the back for motor access though.
John
Posted:
Thu Apr 02, 2009 2:39 pmby bruce
I think Dennis is building a "special flowbench" we've talked in the past 
Dennis, If I can help give me a shout!
Posted:
Wed Apr 08, 2009 5:58 pmby jfholm
Dennis,
Don't you have a web site. I thought I used to have it and if it is the one I am thinking of was a good site. If you do would you mind posting your web site here.
Thanks,
John