Tractorsport Flowbench Forum Archive

Posted: **Thu Dec 07, 2006 12:29 am**

[color=#000000]I posted this over on speed talk.

I have 2 questions, so bear with me.

I purchased a swirl meter for my flow bench, to see what is going on with ports, valve angles etc

Posted: **Thu Dec 07, 2006 10:25 am**

Sometimes the swirl can come around and interfere with the flow coming into the cylinder from the backside.

Posted: **Thu Dec 14, 2006 4:09 am**

Posted: **Thu Dec 14, 2006 4:27 am**

I can take some pictures but not sure how to add them.

Yes, I felt the step was the cause also.

I've been trying some other tests, I'll post when I am thru.

Tractorsport Flowbench Forum Archive

Swirl good or bad?