Posted: Sat Dec 31, 2005 2:53 pmTake a look at some of these. There's a lot of tabs. Be careful if making
any changes!
Applicable Notes:
The Compression file was my early work on looking at static and dynamic compression ratios on the early Fiat 2-liter, Twin-Cam work I was doing. There are plots that show static CR vs. chamber volume, and later dynamic compression ratios vs valve timing events. At the time it was a great learning experience.
any changes!
Applicable Notes:
The Compression file was my early work on looking at static and dynamic compression ratios on the early Fiat 2-liter, Twin-Cam work I was doing. There are plots that show static CR vs. chamber volume, and later dynamic compression ratios vs valve timing events. At the time it was a great learning experience.