Posted:
Wed Jan 18, 2006 9:10 am
by hollywood63
Looking for the formula can't seem to find it on a search
Posted:
Wed Jan 18, 2006 1:26 pm
by bruce
L/D = valve lift/valve dia (L/D) not much more of a formula needed.
The answer to L/D is what you set your test height at. So if you are testing at .100 and your valve dia is 1.380 your .100 lift setting would be .072" now take a 1.425 valve dia at the same lift and you would test at .070". This allows you to compare different valve dias to each other.