Blower and stuff - Noob

Pitot Style Bench discussions

Postby Micael » Sun Oct 14, 2007 6:00 am

Hi Guys,

I have got some stuff from a friend in the ventelation business. All sorts of tubes and probes. But the main thing is a blower that they use for leakage testing in ventelation systems.

I made a rather crude testrigg to se if I could get it to deliver 10"-28" of H2O.
I only manage to get it to deliver 8" of H2O.

Is there a way to make this type of blower to deliver a higher preassure? Or is my testrigg wrong?
Micael
 
Posts: 9
Joined: Mon Feb 27, 2006 12:44 pm
Location: Sweden

Postby Micael » Sun Oct 14, 2007 6:04 am

LOL!!!

Wrong picture

this is when i used electrolysis to remove rust form old car parts.

Moderator: you can remove this picture
Micael
 
Posts: 9
Joined: Mon Feb 27, 2006 12:44 pm
Location: Sweden

Postby Micael » Sun Oct 14, 2007 6:06 am

here is the right one
Micael
 
Posts: 9
Joined: Mon Feb 27, 2006 12:44 pm
Location: Sweden

Postby Micael » Sun Oct 14, 2007 6:07 am

and this
Micael
 
Posts: 9
Joined: Mon Feb 27, 2006 12:44 pm
Location: Sweden

Postby Micael » Sun Oct 14, 2007 6:08 am

and the last one, which shows the fan in the blower.
Micael
 
Posts: 9
Joined: Mon Feb 27, 2006 12:44 pm
Location: Sweden

Postby ThomasVaught » Sun Oct 14, 2007 8:04 pm

Ventilation system blowers are designed to move large quantities of air at low pressures as most ducting for the systems is pretty fragile. A good flow bench with high vacuum/pressure motors has enough pressure/vacuum to blow out the walls of a 3/4" plywood enclosure. A few people have discovered that fact of physics.

You would be better off buying a few motors from the surplus outfit that most members buy from. The motors are reasonable in price (around $10.00 each).

Hope this helps you out.

Tom V.
ThomasVaught
 
Posts: 80
Joined: Fri Jul 06, 2007 9:06 pm


Return to Pitot Style Bench discussion

Who is online

Users browsing this forum: No registered users and 2 guests