Posted: Sat Oct 03, 2009 3:46 pmHI WHAT SIZE LOAD CELL WILL I NEED TO FIT ON MY TELMA
CHEERS TERRY
CHEERS TERRY
What model Telma do you have Terry and how are you mounting it
Cheers
Lynds
Tractorsport Flowbench Forum Archive
Archived Flow Bench Forum
http://www.tractorsport.com/forum/
S BEAM LOAD CELL
Page 1 of 1
Posted: Sat Oct 03, 2009 3:46 pmPosted: Sat Oct 03, 2009 9:26 pmPosted: Sun Oct 04, 2009 11:24 amI'd think you'd take either the maximum torque that or Telma is capable of absorbing or, the maximum torque load you'd expect on your dyno multiply that by the length of the load arm on your dyno and that should give you the maximum load that your S-beam will experience. I'd get the smallest rated S-beam available that's capable of handling that loading.