Posted: Tue Jan 15, 2008 6:11 pm
Hi all new to the forum and have a question regarding motors.
want around 600 cfm and to be able to test at 28 inches not to sure what motors to use.
will have the space for 9 and i will be running on 240 volts electric.
be looking at the motors and was thinking of these.
Domel Vacuum Motor Model 49637192 2-Stage 230 Volt
Motor Specs
Motor Type: Thru Flow
Bearings: Double Ball Bearing
Water-lift: 120.6 inches
Maximum Air Flow: 137.7 CFM
Maximum Air Watts: 1595
Peak Amps: 7.12
what do you think and will they do the job????
thanks in advance.
james
want around 600 cfm and to be able to test at 28 inches not to sure what motors to use.
will have the space for 9 and i will be running on 240 volts electric.
be looking at the motors and was thinking of these.
Domel Vacuum Motor Model 49637192 2-Stage 230 Volt
Motor Specs
Motor Type: Thru Flow
Bearings: Double Ball Bearing
Water-lift: 120.6 inches
Maximum Air Flow: 137.7 CFM
Maximum Air Watts: 1595
Peak Amps: 7.12
what do you think and will they do the job????
thanks in advance.
james