Posted: Wed Jul 02, 2008 6:39 amI tried to find out where I can get a clippard switch and is fell over pneumatic 4 way switchers.
I have absolutely no knowledge in this pneumatic valves, so I hope someone here does have experience.
I found several valves from various manufactors which look like following:
The connections are inline M5 or 3/8 inch inside threads and they are available for 12 volt controlling.
I am not sure if these valves work with our quite low pressure rates when measuring across the orifice or measuring the static pressure.
Could someone enlight me ?
Daniel
I have absolutely no knowledge in this pneumatic valves, so I hope someone here does have experience.
I found several valves from various manufactors which look like following:
The connections are inline M5 or 3/8 inch inside threads and they are available for 12 volt controlling.
I am not sure if these valves work with our quite low pressure rates when measuring across the orifice or measuring the static pressure.
Could someone enlight me ?
Daniel