Tractorsport Flowbench Forum Archive

Posted: **Thu Oct 06, 2005 9:33 am**

I am using 8 of the 16-1234 motors from www.surpluscenter.com

Does anyone else use these motors? If so, what cfm/pressure have you been able to get out of them?

Posted: **Thu Oct 06, 2005 11:37 am**

360scfm @ 28" using 4 of those motors pulling through a Flow Performance FE2.0m flow element and an FR4 bench receptacle. An orifice may not net you as many cfm.

John

Tractorsport Flowbench Forum Archive

Motor cfm