Who has a flow bench based on the MSD or mercdog? How many vacuum motors do you have? Has anyone had a problem with the motors overheating or burning up?
Is there anyway of cooling the motors off?
Flow bench motors overheating
3 posts
• Page 1 of 1
by Mousehouse1 » Tue Jul 19, 2005 4:46 pm
- Mousehouse1
- Posts: 210
- Joined: Tue Jul 12, 2005 4:27 pm
- Location: Oklahoma City
by 86rocco » Tue Jul 19, 2005 8:48 pm
You shouldn't have any problems if the blower you use are of the "thru-flow discharge" type. These blowers are the most common type used for dry applications, the air moved by the blower is discharged thru the motor itself to provide cooling. So as long as you don't throttle the air back too much, there'll be sufficient air flowing through the motor to cool it.
- 86rocco
- Posts: 319
- Joined: Fri Mar 12, 2004 9:11 am
by larrycavan » Tue Jul 19, 2005 8:51 pm
- larrycavan
- Site Admin
- Posts: 1183
- Joined: Fri Apr 01, 2005 4:40 pm
3 posts
• Page 1 of 1
Return to Orifice Style bench discussion
Who is online
Users browsing this forum: No registered users and 11 guests