Tractorsport Flowbench Forum Archive

by **99-1225996533** » Sun Nov 09, 2008 3:18 pm

Hello, Who among you use and know the characteristic of pass around plate which are sold under flowbench parts.

R.C

by **bruce** » Sun Nov 09, 2008 9:21 pm

What info exactly are you looking for?

by **99-1225996533** » Mon Nov 10, 2008 7:56 am

Hello, I would like to know how many CFM it is possible to have with its plates when using a pressure of 25 inches of water.

by **bruce** » Mon Nov 10, 2008 8:10 am

I can machine the plates to any CFM range you require?

The standard set of PAP calculated CFM @ 25" would be:

94.5
189
283.5

If that is what you need.

Edited By bruce on 1226320685

by **MrHijet** » Mon Nov 10, 2008 8:39 am

cre,

if you just need the plates for doublechecking your own orifice plates, let me know. I have 3 plates, which I can lend you for around a month.

(I am in Europe, so it is quite cheap)

Daniel

by **99-1225996533** » Tue Nov 11, 2008 5:00 pm

Hello thank you for your offer Daniel but for now I have no good qualities orifice plate then I will buy a set at Bruce 283.5 CFM is enough for me I only work on vw flat 4 cylinder head and a breech top level CNC machined delivers about 260 CFM.

by **MrHijet** » Tue Nov 11, 2008 7:23 pm

Hey Bruce,

Cre's forum account is dropped. I assume thats the forum bug again.

@Cre:
Good luck with your flowbench.

Daniel

by **bruce** » Tue Nov 11, 2008 8:52 pm

Daniel, THANKS!

I'm trying to figure out what makes it happen, seems random But Cre's has dropped twice now in the past month. What really sucks is it sets the forum to guest so nobody has any idea who made the post.

UGH!!!!!

Edited By bruce on 1226451208

by **MrHijet** » Wed Nov 12, 2008 6:18 am

This is kinda offtopic, but let me know if you are thinking about a new forum software. Eventually I can help you out.

Daniel

Tractorsport Flowbench Forum Archive

PAP

Who is online