Starting Bench

A place to post links to your flowbench projects to share with everyone on the board.  You can share a description and pics also here please limit the size of your picture files to low res pics, Thanks

Postby B. Elliott » Sat Dec 24, 2005 2:57 am

Here's a few pictures of the bench i've been throwing together. Right now it's a rigged-up pitot setup, measuring velocity with some bent copper tubing. I plan on picking up an averaging pitot tube from Bruce in a couple of weeks. only 6 motors for now.

Right now i'm in the process of rewiring the motors and sealing up the joints. After that a leak test.

For the heck of it, I tapped my U-manometer into the inside and outside bend of the first 90degree bend in the system, right under the plenum. i'm actually getting somewhat of a flow reading. Anyone ever hear of using a simple 90deg bend as a flowmeter? Or is it only applicable to heavier weight flows (non compressible)?

Image
Image
Image
Image

I'll add some more info in the following days. Sorry if the pics are too large. :D
B. Elliott
 
Posts: 12
Joined: Thu Jul 07, 2005 3:57 am
Location: Chattanooga, TN

Postby Thomas Vaught » Sat Dec 24, 2005 1:13 pm

Keep working, it is a very good start.

Tom V.
Thomas Vaught
 
Posts: 465
Joined: Fri Feb 18, 2005 5:36 pm
Location: Michigan


Return to Readers Flowbench projects

Who is online

Users browsing this forum: No registered users and 2 guests