Ton V. 's wireing schematic

Place to post/discuss programs & spreadsheets useful for flowbenching. FPExcel, Pipemax etc . . .

Postby The Silver Bullet » Sat Apr 15, 2006 12:28 am

Here is a wire schematic developed by Tom V.
The Silver Bullet
 
Posts: 31
Joined: Sun Mar 26, 2006 11:17 pm
Location: N. Florida

Postby resbum » Fri Mar 27, 2009 1:09 pm

I will likely use this diagram as I am just starting to put things together..Would anyone care to comment on connecting a variac for speed control?
My guess is it needs to be AFTER the relays so the full 120V is available for them.

But, I am thinking I will need 2 variacs the way this is laid out.
Any ideas?

Also from my limited house wiring, it looks like I am using a 220 service for this. I am just spliting off separate 110 legs to the motors, correct?
resbum
 
Posts: 7
Joined: Wed Feb 18, 2009 4:38 pm


Return to Useful Programs & Spreadsheets for flowbenchin'

Who is online

Users browsing this forum: No registered users and 0 guests