More progress...
So now it's got a counter top for it, wheels and the bleed valve has been trial fitted. If your wondering what the lump of wood is for on the bottom right of the bench it's because I made a small mistake in screwing in a screw that was too long in the area under the large hole on the right. It showed signs of splitting the mdf in that area so I used the wood block, screwed from the side and below to pull it together.
One of the things I've learned with the MDF is that you have to be really careful how you screw it together.
What's left to do now to the case is to paint the inside and fit and wire up the motors.